Vtp client not updating


03-Mar-2018 22:36

Trunks are working as per the lab config i.e switch one has 3 trunks to each of the other switches but the other switches do not have trunking directly to any other switch but switch 1.

Switch 4 is not updating correctly when vlan is updated on Switch 2. When swtich 1 is client, updates are correctly made to all switches including switch 4. Rack1SW1#show vtp status VTP Version : running VTP2 Configuration Revision : 0 Maximum VLANs supported locally : 1005 Number of existing VLANs : 16 VTP Operating Mode : Transparent VTP Domain Name : CCIE VTP Pruning Mode : Disabled VTP V2 Mode : Enabled VTP Traps Generation : Disabled MD5 digest : 0x45 0x38 0x3B 0x B5 0x FC 0x7D 0x89 0x43 Configuration last modified by 1.220 at 3-1-93 Rack1SW2#show vtp status VTP Version : running VTP2 Configuration Revision : 11 Maximum VLANs supported locally : 1005 Number of existing VLANs : 17 VTP Operating Mode : Server VTP Domain Name : CCIE VTP Pruning Mode : Disabled VTP V2 Mode : Enabled VTP Traps Generation : Disabled MD5 digest : 0x68 0x0B 0x63 0x90 0x52 0x AD 0x7E 0x79 Configuration last modified by 1.220 at 3-1-93 Local updater ID is 1.220 on interface Vl1 (lowest numbered VLAN interface found) Rack1SW3#show vtp status VTP Version : 2 Configuration Revision : 11 Maximum VLANs supported locally : 1005 Number of existing VLANs : 17 VTP Operating Mode : Client VTP Domain Name : CCIE VTP Pruning Mode : Disabled VTP V2 Mode : Enabled VTP Traps Generation : Disabled MD5 digest : 0x68 0x0B 0x63 0x90 0x52 0x AD 0x7E 0x79 Configuration last modified by 1.220 at 3-1-93 Rack1SW4#show vtp status VTP Version capable : 1 to 3 VTP version running : 2 VTP Domain Name : CCIE VTP Pruning Mode : Disabled VTP Traps Generation : Disabled Device ID : 000f.2487.4700 Configuration last modified by 1.220 at 3-1-93 Feature VLAN: -------------- VTP Operating Mode : Client Maximum VLANs supported locally : 1005 Number of existing VLANs : 16 Configuration Revision : 10 MD5 digest : 0x45 0x38 0x3B 0x B5 0x FC 0x7D 0x89 0x43 0x BB 0x8D 0x53 0x77 0x60 0x BC 0x B7 0x90 Now you should be able to update SW4 via SW2 without a problem.

I am not sure if it is some sort of order of operations or what.

I configure all my trunks and port-channel just fine.

By default all the VLANs that exist on a switch are active on a trunk link.Hi I am currently working through some of the exercises in INE's workbook 1.I'm on VTP exercises now and have the same lab setup as the INE lab setup exactly.Also any switch that has the same VTP domain name configured will join and exchange VTP information.



VTP Mode Client to Transparent. by. If your new switch in VTP client mode is not getting all the VLANS in. The problem is that the vtp client is not updating.… continue reading »


Read more